Filter Search Results

Filter by Categories
Filter by Brand
Filter by Price

Warranty

One YEAR Warranty Conditional Manufacturer’s Warranty Certificate / Record PWR Performance Products manufactured items are warranted to the original purchaser to be free of fault for materials and workmanship for a period of one year from the date of purchase and only when used under normal designed operating conditions. Unless other terms specified in writing by PWR to the Purchaser, the standard warranty term of one year applies. Claims for damage to other related components of the purchaser are not covered by this warranty. The PWR Performance Products user is responsible for the monitoring of product operations and for having the appropriate detection devices in place to warn the user of any related issues or system malfunctions. Responsibility for any damage, injury or loss attributed to any fault in material or workmanship in PWR products shall be limited by replacing the unit on return of the defective product. 

 

Warranty VOIDS: 

· If product is not fitted by an authorised installer. 

· If product is not serviced. 

· If the product is repaired or welded by another party other than PWR Performance Products. 

· If any defect is attributable to an accident, abuse or negligence. 

· Where the product is used for an application for other than it was intended. 

· If any parts or accessories are fitted which detrimentally affect the product. *Failure to carry out and record an electrolysis test as per the instructions supplied where applicable. 

 

Warranty does not cover: 

• Charge relating to removal and replacement of the product.

• Internal or external corrosion. 

• Any consequential damage. 

• Freight

 

IMPORTANT INFORMATION FOR FITTING 

Please read the following before fitting our PWR Performance Product. 

WARNING: Failure to follow this procedure will void your warranty. 

• Do not use this product in any other motor vehicle for which it is not designed. 

• Do not use any other mounting location / method other than described in this instruction. 

• It is advisable to seek assistance of another person when installing this product. 

• Do not repair or modify this product and / or its mounting bracket in any way - repair or modification may affect proper operation of the vehicle or cause destruction of property. 

• Ensure all torque settings are followed. 

• Be sure to clean and remove any loose debris before removing pipe work as debris entering the engine could be detrimental to the engine and or components

Radiators: 

• Before removing the old radiator check the existing coolant for stray current. This is done by connecting a voltmeter between the coolant and the battery ground. The meter should have a range of at least 12 volts (assuming the vehicle have a 12-volt charging system) and a sensitivity of at least one-tenth of a volt. By connecting one test lead to battery ground and placing the other lead into the coolant (DO NOT TOUCH THE METAL CORE OR FILLER NECK) any voltage indicates current passing through the coolant however our maximum allowable limit is 50 millivolts. If your reading exceeds 50 millivolts, please consult a professional to diagnose the cause of this condition.

• If no current is found flush cooling system with distilled water to remove the existing coolant/inhibitors. When the entire system has been flushed including the overflow bottles, you can fit the new radiator. DO NOT MIX COOLANTS 

• Select a coolant that is recommended by the manufactured or by PWR. Product must meet the current AS2108 or manufactures engine coolant/inhibitor standard and refill system. Bring engine up to temperature and let cool. Re-Check the coolant level and top up if necessary. USE ONLY DISTILLED WATER. 

• IMPORTANT- again recheck step 1 for any stray current. 

• PLEASE be careful when fitting and make sure all mounting points are tight (to manufacturers specifications) and there is sufficient clearance, so no rubbing occurs. 

• PLEASE ensure that all hose clamps are done up. 

• Correct cap must be used for each individual system. Intercoolers: 

• PLEASE be careful when fitting and make sure all mounting points are tight (to manufacturers specifications) and there is sufficient clearance, so no rubbing occurs. 

• PLEASE ensure that all hose clamps are done up.

 Oil Coolers: 

• PLEASE be careful when fitting and make sure all mounting points are tight (to manufacturers specifications) and there is sufficient clearance, so no rubbing occurs. 

• PLEASE ensure that all hose clamps are done up. 

• Do not run over 80 psi rating.

 

Liquid to Air Barrel Intercooler kits: 

• Select a coolant that is recommended by the manufactured or by PWR. Product must meet the current AS2108 engine coolant/inhibitor standard and refill system. Cycle the fluids through the system to remove air locks. Re-Check the coolant level and top up if necessary. USE ONLY DISTILLED WATER 

• PLEASE be careful when fitting and make sure all mounting points are tight (to manufacturers specifications) and that there is sufficient clearance, so no rubbing occurs. 

• PLEASE ensure that all hose clamps are done up. 

• Pump must be fitted in accordance to fitting instructions supplied and by a qualified auto electrician.